Shark vacuums are durable and efficient cleaning titans. Built to handle most floors, corners, crevices, and other areas in your home or business, Shark vacuums are very powerful, include a number of convenient accessories, come in many shapes and sizes, and are easy to handle.
However, from time to time, your Shark vacuum may start to act a little weird. It may not pick up dirt like it normally does, or it may make a loud noise when turned on.
Don’t worry, your Shark vacuum is equipped with a built-in diagnostic tool that may already be literally clearing up the problem your vacuum is facing.
Your Shark vacuum has a health monitor
If you’re using a traditional Shark vacuum (upright or cordless), you’ll find a helpful LED indicator light somewhere on the main vacuum head. Although the exact location of this indicator varies by model, it shouldn’t be difficult to locate.
Think of this light as a health monitor for your Shark vacuum. Of course, you don’t need to be a trained doctor or vacuum repair expert to understand what these different lights mean, but if you’ve noticed that your Shark vacuum hasn’t been working properly lately, there’s a good chance that the LED light will glow or flash. of a certain colour.
Let’s find out what all those different LED colors mean and how to fix the problem the indicator is pointing to.
steady red light
Bill Roberson/Digital Trends
Have you noticed that your Shark vacuum isn’t picking up dirt and crumbs as effectively? If this is a persistent problem for at least a few cleaning cycles, the LED indicator on your vacuum is most likely glowing red. Usually this refers to one or two different diseases.
Most of the time, a steady red light means there is something wrong with your vacuum’s main brush roll, meaning the brush isn’t spinning properly. In many cases, a stuck brushroll simply won’t spin. The problem may be caused by hair, loose string, parts of a plastic bag, or some other type of obstruction in the tie.
To deal with these tethering enemies, go ahead and unplug your Shark vacuum from whatever outlet it’s plugged into (if it’s a corded model), then turn the vacuum over to reveal the underside of the vacuum head. If you can use your fingers to remove any stubborn pests clinging to the brush, this may be all you need. However, sometimes it’s easier to just chop or cut the hairs and skewer them with scissors or a utility knife.
Once you’ve removed the buildup, turn the vac over, plug it back in, and turn it over. If the LED is no longer red and the brush roll appears to spin normally, you have resolved the issue.
flashing red light
On many Shark vacs, that same red light can blink intermittently instead of staying constant. While this could be a sign that the brush roll is clogged, a flashing red light usually means your Shark vacuum has overheated. This problem is often caused by a damaged brush roll or some other type of vacuum blockage.
An overheated vacuum is one of the main causes of motor burn-out, so you’ll want to get to the bottom of things quickly. Fortunately, Shark vacuums have a temperature sensor that will automatically shut off the vacuum’s power supply if the operating temperature gets too hot.
Often an overheated vacuum cleaner sound different. If your Shark is emitting forced higher frequencies (the kind of noise that hurts your ears), it’s most likely clogged and on the way to overheating.
Here’s how to fix it: Unplug the Shark Vac from the electrical outlet and allow 30 minutes to an hour for it to physically cool down. After giving your vacuum a much-needed break, the first thing we recommend is turning it over and checking the brush roll for lint or lint. If everything seems fine, there may be a blockage elsewhere.
Disconnect all hoses and fittings to check for deposits. Clean as needed, empty the dust bin, and also check the vacuum filters. After all parts have been repaired, reconnect all peripherals and reconnect the Shark vacuum to power (if necessary). If you turned it on and the flashing red light went out, you have avoided another problem.
flashing headlights
Bill Roberson/Digital Trends
Many Shark vacuums have LED headlights on the front of the vacuum head. These task lights make it easy to spot dirt and dust lurking in the nooks and crannies of your home, but also act as a secondary indicator of health.
If your Shark’s LED headlights are flashing nine times out of 10 it means your brush roll is clogged. Follow the steps above (in the “full red light” section) to get the brush roll back to working properly.
steady green light
Green means go, right? Well quite.
If the LED indicator on your Shark is solid green, it just means that the brush roll, motor, and other components of the vacuum are working properly.
Need more help with your Shark vacuum cleaner? Check out our Shark Vacuum Repair and Troubleshooting Guide, which covers all types of vacuum cleaners made by Shark, including robot models!
editor’s recommendations
Categories: GAMING
Source: newstars.edu.vn